FARMTECH MACHINERY

Suitable feeding, livestock bedding & poultry bedding (Fits 2x 5' Round Bales Or 1x Big Square)

Comfortable livestock is more productive.

For straightforward bale processing the 404M/505M/505XLM range offers fast effective milling of straw and miscanthus to a very consistent and fine length.

Operation

Blow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements. 

The Tomahawk 404M, 505M and 505XLM Bale Processors use Blades or Hammers to chop dry material until small enough to pass through the holes in a screen. A range of screens is available with holes from 15mm to 36mm to obtain a material of a consistent chop length.

Easy control of output by adjusting the speed of drum rotation.

Configurations
* Tomahawk 404M - Suitable for 1.2m (4') diameter bales.
* Tomahawk 505M - Suitable for 1.5m (5') diameter bales.
* Tomahawk 505XLM - Suitable for 1.5m (5') diameter bales and full-size Hesston bales.

Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.

The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve.

British built and backed

For your peace of mind, Tomahawks are backed by an efficient after-sales service from our production facility in Cornwall, England.

The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.

BENEFITS

Processing
* Process your own straw for TMR - no need to stockpile.
* Quicker, better TMR mixing with prechopped straw.
* Improved palatability - chopped straw improves digestion.

Bedding
* Save Straw - users report typical savings of 30% compared to manual bedding down.
* Cleaner livestock - healthier animals and fewer disease problems.
* Save labour - one person bedding operation.
* Specify the right machine for the job - short chop for poultry & cubicles, light shredding for loose housing.

Drum Tomahawks
* Simple - drum turns clockwise, the rotor turns anti-clockwise, and material is skimmed off the end of the bale.
* No gearbox - direct drive from PTO. Hydraulic drive to drum.
* Feed rate is controlled by the angle of the drum. 

FEATURES
* Direct Drive
* Choice Of Material Chop Length
* Knife System
* Hammer System
* Chute On/Off Levers
* Easy Loading
* Slip And Overrun on PTO

OPTIONS
Choice of Material Chop Length
Hydraulic Top Link
Straw Giraffe Chute
Quick Hitch A-Frame
Electric Drive
Various Drum Lengths
Hydraulic Deflector
Castor Wheel Kit
2.78m Long Drum 505XLM Model
Swivel Giraffe Chute

Specifications - 505XLM
Drum Diameter: 1.83m
Maximum Round Bale Diameter: 1.5m
Maximum Rectangular Bale Size: 1.2m x 1.2m
Height Overall with the machine on ground: 2.78m
Width with chutes closed: 2.05m
Lower chute discharge height: 0.4m
Upper chute discharge height: 1.09m
Length Overall: 3.68m
Drum Extensions Available: N/A.
Operating Width: 2.13m
Operating Width with Giraffe chute: 2.35m
Swivel Giraffe Chute discharge height: 2.84m
Straw Giraffe Chute discharge height: 1.9m
Weight: 1135kg
PTO power required: 100HP
Straw: Short Chop
Feed Baled Silage: No
Feed Clamp Silage: No
Bed Cubicles / Straw Processing: Yes
Bed Loose Housing: No

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2024 TEAGLE T505 XLM BALE PROCESSOR

The Tubeline TL60 Bale Wrapper is the new generation of TL Series inline bale wrappers and are built to provide producers and custom operators with high efficiency and proven reliability. To ensure that everyone can reap the benefits of the high moisture hay, Tubeline BaleWrappers are available in multiple configurations to suit your needs and your budget.

Tubeline TL60 LSVS "Platinum" Wrapper (Limit Switch Valve)
* 20HP Hondo c/w high HYD pump
* Dual hydraulic poewrdrive kit
* Remote steertings and shutdown kit
* 4 butoon controller
* Wireless plastic sensor shutdown kit
* LED light
* Bale dispatch kit
* Offset twin wrap kit
* Laser guidance system

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2025 TUBELINE TL60 LSV-PLA BALE WRAPPER

The CZ-M Chisel Plough is available with 5, 7, 9, or 11 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines.

Since it swells the soil without turning over it, decomposition of organic materials is too slow and damp soil is not removed to the top. Since stubble and plant residuals scratch the surface, a good upper layer composes. It is very effective against weeds that are robust and develop roots. It can be used successfully in heavy soils where other materials are insufficient in terms of quality and capacity. While chisel swells the soil in ploughing depth and stubble stays on the land surface, it provides a protective impact against water and wind erosion. If the soil is wet and damp, it should be avoided to use this tool. 

The main functions of these chisel type ploughs are breaking hard bottom soil which is formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damage. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle.

Specifications - CZ-13-M 
Number Of Tines: 13
Angle Of Penetration: 30 Degrees
Total Height: 1300mm
Working Depth: 150-350 mm
Furrow Distance: 275 mm
Working Width: 320cm
Machine Weight: 670 kg
Required Tractor Power: 110-140 HP


Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 FARMTECH CZ-13-M CHISEL PLOUGH + PACKER ROLLER (13 TINE, 3.6M)

FARMTECH TYRE ROLLER 4.0M TRAILING

Australian made tyre rollers by FarmTech Machinery.

* 1.6m To 4.6m Working Widths
* Trailing
* Detachable Drawbar
* Can Be Filled With Water/Oil For Extra Weight
* Sturdy, Painted RHS Frame.
* Leg Stand

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 FARMTECH FTM-4000ROLLER-T TYRE ROLLER (4.0M) TRAILED

The Minos Agri TDSP Flail Mower/Mulcher is suitable for topping Grass, Orchards, Vineyards and general mulching use and is a rear tractor mount implement with 3 point linkage, driven by a 540RPM tractor PTO.

Working widths are available from 1200mm to 2600mm. Utilises a heavy-duty rotor with hammers, heavy-duty body, rear rakes and an adjustable rear roller that combined helps to preserve cutting height, blade strength and balance even on uneven soil.
1.85m High Body Mulcher, Hammers, Rear Roller, Rake Tines, 580KG. Suit Tractors 55HP. Made In Europe.

Specifications - T-DSP 1850
Working Width: 1777 mm
Overall Length: 1100 mm
Overall Height: 1050 mm
Number Of Blades: 20
Machine Weight: 580 kg
PTO: 540 rpm
Required Power: 55 HP

Machine/Equipment base price only, additional price for optional extras.

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2025 FARMTECH T-DSP 1850 MULCHER (1.85M)

Economy Ground drives Drop spreaders for a variety of fertilizers and compost.

Standard features
1- stainless steel body
2- ground drive with a stainless steel distributor
3- 1.8, 2.2, and 3m widths
4- 3 point linkage  (3 point linkage)

FEATURES
* Drops naturally with the rotation of the wheels (Ground driven)
* Adjust the spreading amount with a lever
* Hopper materials: Stainless steel
* Types : ATV, UTV Type

Specifications - ILS-200
HOPPER CAPACITY: 300L
SPREADING WIDTH: 1.2m
FEATURES: Stainless steel hopper
TYPE: ATV

OPTIONAL EXTRA'S: 
Drawbar 

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia-wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 SPREADX ILS-200S LIME SPREADER (1.2M)

Jeantil, 1st manure spreader manufacturer certified by the DLG (German Agricultural Society)
Price: (POA)

Committed for a long time in technical progress, Jeantil guarantees you precision, regularity, and quality of an environment-friendly spreading. Since 2004, Jeantil manure spreaders with vertical augers have obtained the most demanding European certification.

A CERTIFIED MANURE SPREADER
The EVR EPAN 5 is the reference for a manure spreader with vertical beaters. Available with a capacity from 10
to 23 m³, it will meet any requirements on spreading as well as on capacities. Certified DLG Signum Test, the
EVR EPAN 5 guarantees you a versatile and quality spreading

THE MOST PRECISE SPREADING DEVICE ON THE MARKET AND CERTIFIED BY THE DLG 
The 2 high vertical beaters dynamically balanced with DLG fingers made of anti-abrasion steel ensure a wide spreading and a high work rate. Transmission is done using a 540 or 1000 rpm gearbox with automatic security and a freewheel.

TOTAL MASTER OF THE SPREADING
The BASIC and SMART proportional electric controls drive the moving floor speed with precision and the DPA system regulates the flow rate proportional to forwarding speed. The SMART Control electric controls with weighing system ensure a high precision thanks to the settings in tons/ha.

A ROBUST BODY, CERTIFIED DLG SIGNUM TEST
The body is made of S355 steel with integrated chassis provides high resistance to wearing and loading. The parabolical body eases the complete emptying and the cleaning.

EASY TO HANDLE ON ALL GROUNDS
The spring drawbar, the suspension, and the integrated chassis make it a heavy-duty and comfortable manure spreader

A REGULAR UNLOADING
2 chains moving floor with bolted bars 80x40 mm.

EASY TRAILING AND CARE OF YOUR SOILS
Thanks to the wide and low-pressure wheels, the care of your soils are ensured.

HIGH PRECISION TECHNOLOGY DEDICATED TO MANURE SPREADING
BASIC, ADVANCED, and SMART proportional electric controls drive the moving floor with precision and the DPA system regulates the flow rate proportional to forwarding speed. The SMART Control electric controls ensure a high precision thanks to the settings in t/ha.

KEY FEATURES
* From 10 to 26 m³ and from 6 to 16 tons payload
* Monobloc narrow body 1.50 m
* Vertical beaters 1.80, 2.00, or 2.25 m high and spreading device certified by the DLG
* Cam safety limiter on the spreading device
* Moving floor 2 chains Ø 14 or 16 mm
* Spring drawbar
* 1 axle or tandem from EVR 16-12
* Direct control on the tractor or electric controls
* Electric control of the moving floor speed
* DREAL (French Government Vehicle Testing)
* Homologation 25 km /h
* Retractable control ladder
* Mudguards
* Compliant with the EC standards

SPECIFICATIONS - EVR 13-10
Empty Weight: 4,530 kg
Payload: 10,000 kg
Volume: 12.30 m3 / 14.3 m3
Loading Height: 2.38 m
Internal Body Height: 1.20 m
Moving Floor Length: 5.15 m
Beaters Height: 1.80 m / 2.00 m
Height Under Frame: 1.50 m / 1.70 m

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information..

2026 JEANTIL EVR 13-10 FIRST MANURE SPREADER (13M3/10 TONNE)

Aerators relieve soil compaction without damaging the grass you already have and prevent rain runoff on your paddocks. Aeration involves perforating the soil with slots to allow water, air, and nutrients to penetrate down to the grassroots.

DID YOU KNOW?
New science has shown that aeration is vital to soil health. Aeration supports the living layer of your soil by creating channels for air and water to feed the aerobic bacteria that live below the surface of the soil. Through aeration, the air is allowed to penetrate the first 100 cm of the soil to support aerobic bacteria growth. Aerobic microbes need air to properly stabilize soil PH and convert organic matter to plant-available nutrients. This microbial activity has been found to increase the water of the soil holding capacity.

Channel and cracks in the soil profile allow rain and irrigation to be easily absorbed by your soil where it's needed instead of running off into the creek. Aeration breaks surface crust and creates deep channels and cracks that drastically increase your soil's ability to absorb moisture. This process helps develop vigorous deep root systems helping your plants become more drought resistant. Deep-rooted plants also have a far greater uptake of minerals and trace elements, ultimately resulting in healthier livestock.

WHEN IS IT BEST TO AERATE YOUR PADDOCKS?
As we all know The best day to plant a tree is... 30 years ago. The second best day is today. It's the same for aeration.

The benefits of aeration are compounded treatment after treatment. we suggest using your Aervator the day it arrives. no matter what time of year that is providing your soil is not waterlogged.

Often we find that annual or biannual use gives the best results though this depends on your soil.

Aussie farmers also use aeration to greatly increase the availability of fertilizer to your plant's root zone by creating a path for the fertilizer to penetrate deep into the soil.

HOW TO AERATE USING AN AERVATOR?
The rotating tine has a very clean action designed to aerate by opening and shattering the topsoil with minimal damage to existing plants, This action is vertical tillage AKA VerTill.

The Design of the Aervator's tines allows them to twist as they pass through the soil this is intentional. Through this motion, the Aervator is able to shatter the soil, greatly reduce compaction and create pathways for air-water, and nutrients to enter your plants' root zone.

For best results the Aervator requires two factors:

WEIGHT. Weight is built into our heavy-duty, over-spec Australian steel frames. If you find your tines are not fully penetrating the soil you have a compaction issue but don't worry we have you covered, just add our optional concrete blocks and those tines will dig into even the most compact paddocks in as little as two passes.
SPEED. The Aervator ideally needs to travel at 7 - 10 kph for the tines to achieve the shattering effect.

Proudly manufactured in Australia. The GH series of Aervator are the workhorse of the Aervator range.AUSTRALIAS #1 AERATOR - Aeration, Renovation, Cultivation, Oversowing & Compaction Relief.

STANDARD FEATURES:
- Hot dipped galv finish 
- Two rows of gangs
- Tines are spaced at 95mm
- Large rotor bearings 
- Multi-gang system 
- Aeration and cultivation settings 
- Gang angle adjustable from 0-10 degrees. 
- Gang adjusting spanner supplied
- Rear tow hitch
- Cat 1-2 pick up
- Built-in weight trays

AVAILABLE CONFIGURATIONS:
- 3PL or trailing
- Fixed or Folding frame
- 2.4 to 5-meter working width
- see page *** for a list of options

SPECIFICATIONS - GH 4004CTF
Size: 4000mm
Cultivation Width: 3750mm
Transport Width: 2800mm
No. Tines Per Rotor: 4
Mounting: Trailing
Approx Weight: 1200kg+
Min HP Req: 95

Larger & Smaller models available

OPTIONAL EXTRAS
- 12v Air Seeder (Technik Plus or Lehner)
- Hydraulic Air Seeder (Technik Plus or Lehner)
- 12v Disc Spreader (Iris or Lehner)
- Chain Harrows (Hackett)
- Mounted Spring Tine Harrows (FarmTech)

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 AERVATOR GH4004-CFT (TRAILING, FOLDING, 4.0M)

Genuine European made heavy duty offset discs! Back in stock! 

Heavy type Wide Offset Disc Harrows are trailed type on two-wheel. It can be easily transported to the field. Trailed type wide offset disc harrow moved by the hydraulic system for transport and depth adjustment. Heavy type Wide Trailed offset disc harrow with hydraulic lifting system is used for breaking clods and mixing soils to make seedbed. Also, it can be used for chopping weeds and stems, breaking plant stubbles (such as sunflower, maize, cotton, wheat and etc.) mixing with soil after harvesting and it helps to obtain a kind of organic fertilizer. This kind of disc harrow can work very easily in wet soils and according to the soil conditions it can be used instead of plough. Battery angle can be arranged till 20-22 degrees. Tires moved standard level and easily adjusted the working depth by means of the axle mechanism on the tire. After harvesting, in dry months this disc harrow can be used for preparing the soils directly to sow up to 27,5 cm depending on disc size used. Size of the frame for this model is 200×200 mm and The number of discs is between 16-42 disc with sizes; 560/610/660 and 710 mm high quality 52 HRC boron steel. It has been used house bearings with conical bearings on one side and ball bearing on another side with high-quality seals. It can be greaseable.

Specifications - WOD 2066
Number Of Discs: 20
Total Width: 2500 mm
Frame Width: 1300 mm
Total Length: 5500 mm
Frame Width: 4000 mm
Total Height: 1295 mm
Frame Height: 850 mm
Disc Diameter: 660x6 mm / 26"
Battery Axle: 40 mm
Working Depth (Max): 250 mm
Working Width: 2500 mm / 8'2"
Space Between Discs: 250 mm
Number Of Bering: 8
Curve Adjustment: Hydraulic
Frame Size: 100x150 mm
Tyres: 10.5/80-15.3
Required Power: 80-85 HP
Total Weight: 1,760 kg

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 FARMTECH DISC-X OFD 24-66 HEAVY DUTY OFFSET DISCS (2.5M)

New Disc-X 24 Plate Offset Disc.
Features:
2.6m Working Width (3.4m Transport Width)
660mm x 6mm Scalloped Discs
225mm Disc Spacing
200mm x 100mm x 6mm Box Frame
40mm Heavy Duty Axles (1060 Steel)
25 Degree Max Gang Angle Adjustment
5-20cm Working Depth
Greaseable Bearings
Adjustable Scrapers
Fillable Box Frame For Extra Weight
1,980kg Unladen Weight
Suit Tractors 90HP+
European Made (Turkey)
Optional Extras:
Hydraulic Gang Angle Adjustment
Airseeder (Electric, Mounted)
Roller (Trailing)
$17,000 + GST + Freight.
Contact Ben for further information

2025 DISCX OFD 24-66 HEAVY DUTY OFFSET DISCS (2.6M)

AUSTRALIAN MADE 12.0M3 VERTICAL FEED MIXER - Designed and manufactured by Australians for the harshest Australian conditions.

BOWL

WIDE BOWL MIXING TUB
The Ausmix tub comes in both standard wide body (2.5m) or our XL body (2.65m) to better suit large, high density bales. The extra wide body gives large bales more space to be pulled into the mixer, reducing any material being thrown out. This greatly improves time efficiency and chop down. In addition, the extra wide body allows for a lower profile design making it more suitable to smaller loaders like tractors and skid steers.

FIBRE-X AUGER
At the heart of every Ausmix is the Fibre-X Auger. Developed for Australian feeding programs, the Fibre-X Auger will correctly process fibre to give your animals the nutritional edge in terms of productivity and herd health.
* Consistent ration/mix from start to finish; substantiated by the Penn State separator test.
* Razor sharp knives chopping fibre with sharp edges for improved dietary scratch factor.
* Auger design suitable for high fibre, forage, grain or heavy wet rations.
* Reduce mixing time with fast chop down of hay and silage bales.
* Leading the way with heavy duty, long life materials  20mm auger and floor plate with 10mm tub walls and tungsten carbide cutting knives.

KNIVES
Fibre-X system leads the way with its ability to process fibre efficiently and effectively. The Ausmix auger features 3 different types of heat-treated tungsten carbides knifes.

CONVEYOR & ELEVATORS
From side shift conveyors with left and right sided feeding to 4.2m elevators to reach the tallest self-feeders, Ausmix offers a full range of delivery systems to match any feeding situation.


FRAME / CHASSIS

HEAVY DUTY CHASSIS FRAME
Our extreme duty frame boasts 20mm steel thickness to improve rigidity and overall strength. Our design eliminates twisting and body roll and can handle any accessories with ease. Our frames are independent to the tub and are secured using 6-point load cells for precision weighing.

OFF-ROAD SUSPENSION
Our ridge frames are complimented with extreme rated, off-road suspension. Ausmix has chosen top of the line CYR suspension, axles and brakes to complete the under carriage of our range of feed mixers.

TYRES
Choice of floatation or road tyres to suite your needs.

SWIVEL HITCH
Standardising a heavy-duty swivel hitch on our Ausmix feed mixers gives reliability and peace of mind to operators that are working in harsh conditions. Whether it is tight turns in a feedlot or uneven, undulating paddocks, the investment you have made in your tractor, mixer and fodder will be better protected with our swivel hitch.

OBERVATION PLATFORM
Connect with your Mix and watch how everything comes together. Non-slip floor, steps and handrails allow you to ascend and traverse the platform safely.


DRIVE TRAIN - PREMIUM OVER SPEC GEARBOXES

TWO SPEED GEARBOX
Low Range:Soft start, consistent mix, even feedout
High Range: Easy clean out

PLANETARY GEARBOXES
Designed for consistent heavy load that you get when mixing a high forage/ fiber ration.
Our heavy-duty gearboxes process big bales with ease.


CONVEYOR OPTIONS
Dual shift front feed conveyor 250mm, choice of chain with stainless steel pan or rubber belt.
Flip up feed conveyor, built to order, 1.1m - 4.0m, end tray, rubber flap, magnet. Choice of chain with stainless steel pamn or rubber belt.

Specifcations - XL 12
Capacity With 230mm Rubber: 12.0m3
Minimum HP: 75
Total Width: 2.65m
Total Height: 2.65m
Total Length: 5.5m
Empty Weight: 4,550kg


Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 AUSMIX FT-XL12 HD VERTICAL FEED MIXER + 1.0M ELEVATOR (12.0M3)

The Farmtech Maxi Series Aervator is ideal for pasture renovation or aeration. 
When a single row of gangs isnt enough to get the results you are hoping for, then its time to call on the literal earth-shattering power of Farmtechss Maxi series! 

The Maxi series offers maximum aeration capability with its additional row of gangs that effectively doubles the effect especially in areas of cultivation by increasing the shattering effect of the soil.

The Maxi series boasts a standard lineup of 4 rigid frame models with working widths that range from between 3-meters to 5-meters. Each requires a tractor with a power output thats somewhere between 120-200 HP depending on the effective width of the model. Center Folding trailing models are also available

To achieve the best results, we highly recommend combining the Maxi series with an electric seeder and a spring tine harrow to create a true one-pass renovator so you can simultaneously perforate the soil as well as apply seeds on your paddock. 


Standard features
Heavy duty over spec steel frames made of Australian steel.
Hot dipped galv finish 
Two rows of gangs
tines are spaced at 95mm
Large rotor bearings 
multi-gang system 
aeration and cultivation settings 

available configurations 
3PL or trailing
fixed or folding frame
2.4 to 5-meter working width
see page *** for a list of options


AUSTRALIAS #1 AERATOR - Aeration, Renovation, Cultivation, Oversowing & Compaction Relief.

STANDARD FEATURES
* Heavy wall 100mm RHS frame
* Heavy-duty double sealed bearings
* Cat 1-2 pick up
* Rear tow hitch
* Gang angle adjustable from 0-10 degrees
* Built-in weight trays
* Galvanised frame
* Gang adjusting spanner supplied

Specifications - GHML-3004
Size: 3000mm
Cultivation Width: 2900mm
No. Tines Per Rotor: 4
Rotors Per Gang: 8
No. Gangs: 4
Mounting: Linkage
Approx Weight: 2060kg
Min HP Req: 120

Larger & Smaller models available: 4.0m linkage, 3.0m trailing, 4.0m trailing and single gang models.

Aervator System Options
To provide an easy and cost-effective oversowing solution we recommend the Turbo Jet 8 air seeder in conjunction with Hacket Harrows.

The Turbo Jet Series can be easily mounted to the Aervator and the Hackett harrows are attached to the sturdy rear tow hitch to provide a "one-pass" pasture renovation system.

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.
Proudly manufactured in Australia
The Maxi series Aervator features a second row of gangs doubling the effect especially in areas of cultivation by increasing the shattering effect of the soil. this feature also reduces the need for a second pass when aerating.

Standard features
Heavy duty over spec steel frames made of Australian steel.
Hot dipped galv finish 
Two rows of gangs
tines are spaced at 95mm
Large rotor bearings 
multi-gang system 
aeration and cultivation settings 

available configurations 
3PL or trailing
fixed or folding frame
2.4 to 5-meter working width
see page *** for a list of options


AUSTRALIAS #1 AERATOR - Aeration, Renovation, Cultivation, Oversowing & Compaction Relief.

STANDARD FEATURES
* Heavy wall 100mm RHS frame
* Heavy-duty double sealed bearings
* Cat 1-2 pick up
* Rear tow hitch
* Gang angle adjustable from 0-10 degrees
* Built-in weight trays
* Galvanised frame
* Gang adjusting spanner supplied

Specifications - GHML-3004
Size: 3000mm
Cultivation Width: 2900mm
No. Tines Per Rotor: 4
Rotors Per Gang: 8
No. Gangs: 4
Mounting: Linkage
Approx Weight: 2060kg
Min HP Req: 120

Larger & Smaller models available: 4.0m linkage, 3.0m trailing, 4.0m trailing and single gang models.

Aervator System Options
To provide an easy and cost-effective oversowing solution we recommend the Turbo Jet 8 air seeder in conjunction with Hacket Harrows.

The Turbo Jet Series can be easily mounted to the Aervator and the Hackett harrows are attached to the sturdy rear tow hitch to provide a "one-pass" pasture renovation system.

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 AERVATOR GH3004 MAXI (LINKAGE, 3.0M)

Find Farm Machinery For Sale. Browse 295 listings from FARMTECH MACHINERY.

New & Used Farm Machinery For Sale

FARMTECH MACHINERY

Sale Price

2024 TEAGLE T505 XLM BALE PROCESSOR

2025 TUBELINE TL60 LSV-PLA BALE WRAPPER

2026 FARMTECH CZ-13-M CHISEL PLOUGH + PACKER ROLLER (13 TINE, 3.6M)

2026 FARMTECH FTM-4000ROLLER-T TYRE ROLLER (4.0M) TRAILED

2025 FARMTECH T-DSP 1850 MULCHER (1.85M)

2026 SPREADX ILS-200S LIME SPREADER (1.2M)

2026 JEANTIL EVR 13-10 FIRST MANURE SPREADER (13M3/10 TONNE)

2026 AERVATOR GH4004-CFT (TRAILING, FOLDING, 4.0M)

2026 FARMTECH DISC-X OFD 24-66 HEAVY DUTY OFFSET DISCS (2.5M)

2025 DISCX OFD 24-66 HEAVY DUTY OFFSET DISCS (2.6M)

2026 AUSMIX FT-XL12 HD VERTICAL FEED MIXER + 1.0M ELEVATOR (12.0M3)

2026 AERVATOR GH3004 MAXI (LINKAGE, 3.0M)

FARMTECH MACHINERY

Dealer Address