FARMTECH MACHINERY

**Special Promotion Offer -  $75,000 + GST**

TANCO 1400V
110 perfectly wrapped bales an hour

Nothing can improve your profitability this silage season than accomplishing more work in less time. Introducing the Tanco 1400V high-speed bale wrapper. Built for farmers and contractors alike, this high-speed bale wrapper can produce 110 perfectly wrapped bales in an hourallowing you to do more work in less time while doing the job yourself. 

More Work, More Clients, More Profit!
The world is getting more expensive every day. Prices of commodities are constantly rising without showing signs of going down. Restricting yourself to a single stream of income is no longer feasible. Nor is relying on other people to complete your work when you can do it yourself and earn money at the same time.  
With the TANCO 1400Vs capacity of 110 bales an hour and those cutting-edge features, you can see how you are losing money by trudging on with your old wrapper.

Highly Advanced Automatic Features
With the help of a Variable Speed Control and its Auto-Load Feature, the TANCO 1400V can achieve a maximum rate of 110 bales per hour, thus increasing your productivity without sacrificing efficiency and productivity: perfect for any projects of any size and scale. 
Its two satellite arms not only allow for greater speed and accuracy but also allows the machine to continue wrapping even if the film breaks or roll runs out of film while in the middle of wrapping a bale.

Balanced Stance resulting in Stability
The wrapping position of the bale is in front of the axle distributing the weight across the low ground pressure wheels and the tractor, reducing ground compaction and resulting in an extremely stable operation whilst remaining lightweight.
The machine also sports a built-in end tipping kit, allowing for bales to be set on their ends where the plastic is thickest to minimize the chance of a puncture and prevent the bale from rolling away.

Additional Features
-Unique Split Wrapping Table
-Film Break Sensors
-Telescopic Cut & Start
-Push button Auto-Park and Un-park
-RDS Expert Controller
-Tanco Dual Stretch Aluminum Dispenser with 55% & 70% stretch options built-in
-End Tip Kit

At FarmTech Machinery, we know you are the kind of farmer who wants to expand your revenue streams and maximize your income during hay and silage season. In order to be that way, you need to wrap everything up on your end as quickly as possible so you can take care of your neighbors as a contractor. 

The problem is, that standard bale wrappers can only wrap a limited number an hour, which makes you feel that even if you work so hard, you can not capitalize on the seasonal demand and make more money. 

We believe that Australian Farmers deserve to maximize their profitability by using the most cutting-edge machinery that will help ramp up the wrapping process. We understand switching from conventional wrappers is an investment. 

Thats why we have rigorously tested the Tanco 1400V in Australian conditions. So we can guarantee it will work for you. Heres how it works: using its auto-load component and variable speed control, this High-Speed Wrapper can achieve rates of up to 110 bales per hour, allowing you to finish sooner and take on more work. 

So Call Now to make an investment that will pay dividends, so you can stop working hard for shrinking profit and start maximizing the returns for your hard work.

2026 TANCO TC 1400V TRAILING ROUND BALE WRAPPER - SPECIAL PRICE

**Special Promotion  Only 1 Left in Stock! $49,000 + GST**

Giving a slice of your profits to silage contractors is no longer practical and economical. At 45 bales an hour, the TANCO A100EH allows you to work at your own pace, time, and strategy while keeping all the profits yourself.


Operators, especially farmers who are looking to become more self-reliant this silage season will appreciate the A100EHs fully automatic function. With just one press of a button, the machine will initiate its Hydraulic Cut & Start system. 

As one bale is being wrapped, another can be carried on the Heavy Duty Adjustable Load Arm as you make your way to the next, shaving precious seconds off your work. 

The A100EH comes with a highly touted End Tip Kit as standard. This attachment overturns the bales upon offloading and places them on their end where plastic coverage is greatest and prevents the bales from rolling.
 
Tanco Dual Stretch Aluminium Dispenser
Hydraulic Cut & Start
Heavy Duty Adjustable Load Arm
Off-Load Lock for consistent bale Position
RDS Expert Controller


Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2025 TANCO TC A100-EH TRAILING ROUND BALE WRAPPER - SPECIAL PRICE

The SGH series are compact aervators that are suggested for farmers that employ smaller, less powerful tractors. 

The SGH series only comes with a single-gang system with widths that range from 1.2 meters to 2 meters. These implements use Australias finest steel to create a sturdy, heavy-duty frame and durable components.

These implements boast a hot-dipped galvanized finish and large rotor bearings to withstand constant wear and tear and keep maintenance to a minimum. 

the SGH models are limited to aeration-only settings. But it more than makes up for it thanks to the original SUPER TINE© and heavy-duty double sealed bearings.

For best effects, we recommend hitching it up with an electric seeder and towing a spring tine harrow behind to create a true one-pass renovator to renovate your soil as well as apply seeds at the same time. 


Standard features
Heavy duty over spec steel frames made of Australian steel.
Hot dipped galv finish
Large rotor bearings
single gang system
aeration only settings

available configurations
3PL or trailing
fixed frame only
1.2 to 2.0-meter working width
see page *** for a list of options

AUSTRALIAS #1 AERATOR - Aeration, Renovation, Cultivation, Oversowing & Compaction Relief.

STANDARD FEATURES
* Heavy wall 100mm RHS frame
* Heavy-duty double sealed bearings
* Cat 1 pick up
* Rear tow hitch
* Gang angle adjustable from 0-5 degrees
* Built-in weight trays
* Galvanised frame
* Gang adjusting spanner supplied

Specifications - SGH-180
Size: 1800mm
Cultivation Width: 1650mm
No. Tines Per Rotor: 4
Rotors Per Gang: 10
No. Gangs: 1
Mounting: CAT 1
Approx Weight: 440
Min HP Req: 40

Larger & Smaller models available: 1.2m, 1.5m, 2.0m and dual gang models.

Aervator System Options
To provide an easy and cost-effective oversowing solution we recommend the IE-100 or Svario 12 volt spreader in conjunction with Hacket Harrows.

The 12-volt spreader can be easily mounted to the Aervator and the Hacket Harrows are attached to the sturdy rear tow hitch to provide a one pass pasture renovation system

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 AERVATOR SGH180 (1.8M)

SeedX FTD 3000

Seeding will never be the same if you equip yourself with the Irtem FTD 3000 Seed Dril! Swift, Efficient, and Highly Economical, the FTD 3000 is the ideal machine for direct drilling, over sowing, and sowing into cultivated land. 

Premium Economy Seed Drill
This incredible machine weighs a whopping 2,800 Kg and every bit of that is put into good work. The main structure is built from heavy-duty, industrial-grade steel that can withstand climates found across Australia. 

The adjustable seed wheels can be calibrated based on what type of seed youre working with like Oats, Barley, Grass, or sorghum while having the capability to calibrate in just a few minutes.

This machine also comes with TWO independent ground-driven gearboxes: one for controlling seed dosage and another for fertilizer dosages! 

Direct Drill
This Seed drill is armed with a 24-row tine drill with 5-inch spacings with hydraulic front coulters and incorporates seed and fertilizer boxes. It boasts a Double Shoot system with staggered drop levels that maximizes seed placement while minimizing the risk of seed burn from the fertilizer. This is followed by a set of press wheels and covering tines to maximize seed soil contact. 

One highlight that this machine has is its Baker boot style point creates excellent tilth for seed bedding. It works in conjunction with the hydraulic front coulters to ensure a clean-cut over the existing surface while minimizing disturbance in over-sowing applications.

High Capacity Seed Drill
This extraordinary machine can simultaneously carry as much as 1080 L of seeds and 700 L of fertilizers and dispense them at a rate of  2kg  150kg+ p/Ha. 

The FDD 3000 features oversized bearings on each disc. Each double row arm is mounted to a 4x triangular rubber mounted block which significantly reduces moving parts and increases the life of the components.

Call the number in the header now! This machine is in stock now and ready for immediate delivery but inventory is limited so don't wait get the seeder your farm needs today!

2026 SEEDX FTD 3000 TINE SEED DRILL (3.0M)

TL70Bale Wrapper - Tubeline
Are you a farmer looking for an efficient and cost-effective way to wrap large volumes of bales every year? The TL70 Bale Wrapper from Tubeline could be the solution you've been looking for.

Made from high-quality industrial steel and powered by a Honda 13 HP motor, the TL70 is the largest among Tubeline's newest generation of inline bale wrappers. This heavy-duty, powerful machine is designed to handle various bale sizes and shapes, including square hay bales, thanks to its patented Twin Wrap system. It can wrap round bales up to 6' in diameter and square bales up to 7' wide, making it a versatile machine that can save you time and money during hay and silage season.

The TL70 offers numerous benefits to farmers who need to wrap large volumes of bales. By wrapping only the circumference, this machine can reduce the cost per bale and use approximately 50% less film per bale than traditional singular bale wrappers. With a fast wrapping cycle time of as little as 17 seconds, the TL70 is a time-efficient solution that can reduce labour costs. Additionally, the TL70's user-friendly controls and optional digital control console make it easy to operate, even for a single person.

What's more, the Tubeline range is available in multiple configurations to suit different budgets and needs. This machine can even wrap two smaller bales double stacked at once, providing greater flexibility and versatility in your bale wrapping operations.

Investing in a TL70 Bale Wrapper from Tubeline is an investment in the efficiency and productivity of your farming operations. By reducing labour, time, diesel, and film costs, this machine can save you money every silage season, potentially providing you with a significant return on investment.

Overall, the TL70 Bale Wrapper is a powerful and versatile machine that can help farmers optimize their bale wrapping efficiency while reducing costs. If you're looking for a fast, efficient, and cost-effective way to wrap large volumes of bales, consider the TL70 Bale Wrapper from Tubeline.
Dial the number at the top of the page now to purchase a TL70.

2025 TUBELINE TL70 LSV-PLA BALE WRAPPER

GH3004 AERMAX-ECO  ONE PASS RENOVATION SYSTEM (3.0 M)

Price excludes GST

The GH3004 AERMAX-ECO One Pass Renovation System is a heavy-duty 3.0 m soil aeration and seeding solution designed to help relieve compaction, improve soil structure and support stronger pasture establishment.

Built for demanding farming conditions, the GH3004 AERMAX-ECO combines soil aeration, seeding and surface finishing in a single pass. This helps reduce the number of operations required across the paddock while creating improved conditions for air, water and nutrients to move through the soil profile.

The system is well suited to pasture renovation, overseeding and soil conditioning applications where improving seed-to-soil contact and reducing compaction are key priorities.

Features:
Galvanised Aerator with Patented Tines
The GH3004 AERMAX-ECO uses patented aerating tines designed to penetrate and fracture compacted soil while minimising unnecessary surface disturbance. This helps improve soil porosity, water infiltration and root development.

3 or 4 Tine Configurations
Available with 3 or 4 tine configurations to suit different soil types, paddock conditions and operating requirements.

2-Gang Rotor Design
The 2-gang rotor arrangement provides consistent soil engagement across the 3.0 m working width, helping achieve even aeration and soil conditioning.

Eco Sow 8 / 150 L Air Seeder
The integrated Eco Sow 8 air seeder with 150 L capacity allows seed to be applied during the aeration process, helping combine multiple operations into one pass.

Seed Distribution Bar
The seed distribution bar helps provide even seed coverage across the working width for more consistent establishment.

Finger Tine Harrows
Finger tine harrows help work the surface after seeding, improve seed-to-soil contact and provide a more even finish across the paddock.

Heavy-Duty Frame

The robust frame is designed to provide the strength and stability required for regular agricultural use and demanding soil conditions.
CAT 2 Three-Point Linkage

The standard CAT 2 three-point linkage provides straightforward tractor connection and compatibility with a wide range of suitable tractors.

Optional Concrete Block Weights
Concrete block weights can be added where additional machine weight is required to improve tine penetration in harder or more compacted soils.

One Pass Renovation System
The GH3004 AERMAX-ECO is designed to aerate, seed and finish the surface in a single operation, helping reduce paddock passes and improve operational efficiency.

Ideal For:
- Pasture renovation
- Overseeding
- Soil aeration
- Compaction relief
- Improving water infiltration
- Improving seed-to-soil contact
- Paddock rejuvenation

Machine/equipment base price only. Additional charges apply for optional extras and selected configurations.

Australia-wide delivery available  ask us for a delivered price.

Prefer to purchase through your local dealer? You can do that too  just ask.

You could also refine the listing

2026 AERMAX-ECO GH3004 ONE PASS RENOVATION SYSTEM (3.0M)

AUSTRALIAN MADE 12.0M3 VERTICAL FEED MIXER - Designed and manufactured by Australians for the harshest Australian conditions.

BOWL

WIDE BOWL MIXING TUB
The Ausmix tub comes in both standard wide body (2.5m) or our XL body (2.65m) to better suit large, high density bales. The extra wide body gives large bales more space to be pulled into the mixer, reducing any material being thrown out. This greatly improves time efficiency and chop down. In addition, the extra wide body allows for a lower profile design making it more suitable to smaller loaders like tractors and skid steers.

FIBRE-X AUGER
At the heart of every Ausmix is the Fibre-X Auger. Developed for Australian feeding programs, the Fibre-X Auger will correctly process fibre to give your animals the nutritional edge in terms of productivity and herd health.
* Consistent ration/mix from start to finish; substantiated by the Penn State separator test.
* Razor sharp knives chopping fibre with sharp edges for improved dietary scratch factor.
* Auger design suitable for high fibre, forage, grain or heavy wet rations.
* Reduce mixing time with fast chop down of hay and silage bales.
* Leading the way with heavy duty, long life materials  20mm auger and floor plate with 10mm tub walls and tungsten carbide cutting knives.

KNIVES
Fibre-X system leads the way with its ability to process fibre efficiently and effectively. The Ausmix auger features 3 different types of heat-treated tungsten carbides knifes.

CONVEYOR & ELEVATORS
From side shift conveyors with left and right sided feeding to 4.2m elevators to reach the tallest self-feeders, Ausmix offers a full range of delivery systems to match any feeding situation.


FRAME / CHASSIS

HEAVY DUTY CHASSIS FRAME
Our extreme duty frame boasts 20mm steel thickness to improve rigidity and overall strength. Our design eliminates twisting and body roll and can handle any accessories with ease. Our frames are independent to the tub and are secured using 6-point load cells for precision weighing.

OFF-ROAD SUSPENSION
Our ridge frames are complimented with extreme rated, off-road suspension. Ausmix has chosen top of the line CYR suspension, axles and brakes to complete the under carriage of our range of feed mixers.

TYRES
Choice of floatation or road tyres to suite your needs.

SWIVEL HITCH
Standardising a heavy-duty swivel hitch on our Ausmix feed mixers gives reliability and peace of mind to operators that are working in harsh conditions. Whether it is tight turns in a feedlot or uneven, undulating paddocks, the investment you have made in your tractor, mixer and fodder will be better protected with our swivel hitch.

OBERVATION PLATFORM
Connect with your Mix and watch how everything comes together. Non-slip floor, steps and handrails allow you to ascend and traverse the platform safely.


DRIVE TRAIN - PREMIUM OVER SPEC GEARBOXES

TWO SPEED GEARBOX
Low Range:Soft start, consistent mix, even feedout
High Range: Easy clean out

PLANETARY GEARBOXES
Designed for consistent heavy load that you get when mixing a high forage/ fiber ration.
Our heavy-duty gearboxes process big bales with ease.


CONVEYOR OPTIONS
Dual shift front feed conveyor 250mm, choice of chain with stainless steel pan or rubber belt.
Flip up feed conveyor, built to order, 1.1m - 4.0m, end tray, rubber flap, magnet. Choice of chain with stainless steel pamn or rubber belt.

Specifcations - XL 12
Capacity With 230mm Rubber: 12.0m3
Minimum HP: 75
Total Width: 2.65m
Total Height: 2.65m
Total Length: 5.5m
Empty Weight: 4,550kg


Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 AUSMIX FT-XL12 HD VERTICAL FEED MIXER + 1.0M ELEVATOR (12.0M3)

Deep fertilizer is primarily used to apply fertilizer into the subsoil in vineyards and fruit gardens.

The BAF 200 vineyard fertilizer spreader with two fertilizing tines are mounted to the tractor via three-point linkage. The space between tines is adjustable and the spreading mechanism can be closed on one side to allow spreading on a single tine.

Standard features
1- twin rippers
2- 3PL
3- PTO


Linkage subsoil fertiliser spreader for vineyards or orchards.

The width between tines is adjustable from 1600mm to 2000mm to suit various row widths.

Each tine can be shut off individually for single-sided operation.

Hydraulic shutters.

Specifications - BAF 200
Hopper Capacity: 300L
Working Width: 1,600-2,000mm
Total Width: 1,750/2,150mm
Total Length: 1,350mm
Total Height: 1,300mm
Linkage: CAT 2
Required  Power: 60HP+
Transmission Type: 1/1
Mixing System: Vertical
PTO: 540rpm
Total Empty Weight: 300kg

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 FARMTECH BAF 200 VINEYARD SUBSOIL FERTILISER SPREADER (300L)

Maximize your tilling and cultivating prowess by using the UNIA CROSS S as your multifaceted tilling solution. Sleek, compact, and robust, the CROSS S fixed frame Deep Ripper speed disc combo will solve your Deep Compaction in no time.

Just aft the support wheels are three rows of CX tines with pad-welded chisels in addition to 370 mm undercutters. However, these can be reconfigured to sport a set of narrow coulters.

At the back, the CROSS S Power Harrow brandishes a row of A-type disc harrows to help dig the soil or cut any unwanted weeds or plant residues.

The entire assembly is attached to a tractor through a Cat. III hitch with a suspension axle for better control during operations. 

This platform can be reconfigured to a DRIVE System which hosts an additional row of Harrow B as well as a Pneumatic Tire Roller in place of the standard pipe roller.

CX tine working depth: W/ undercutter - 15 cm, W/O undercutter - 30 cm
Power Required: 180-320 HP
Underbeam Clearance: 85 cm
Tine Spacing: 30 cm

Machine/Equipment base price only, additional price for optional extras.

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 UNIA CROSS S 3 STANDARD CULTIVATOR (3.0M)

Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards clean while delivering rich nutrients to the field. Removeable beater assemblies provide increased value and functionality, allowing the NITRO to operate as a rear discharge trailer with a live floor when not spreading.
Price: (POA)


Apron Chain Limited Lifetime Warranty
Under the Apron Chain Limited Lifetime Warranty, Tubeline will replace a broken apron chain or connecting link on any Nitro model manure spreader. Restrictions may apply. For more information, please contact the Tubeline office.

CV Shaft
All Nitro models come equipped with a CV (Constant Velocity) Shaft allowing for a tighter turning radius, greatly reducing the incidence of driveline chatter in a tight turn, and increasing the longevity of the driveline.

Guillotine Endgate
The guillotine endgate can be opened partially to meter the amount of material being delivered to the beater assembly. This ensures the optimal delivery of lime and various manure consistencies to the field.

Other Standard Features
* Hydraulic-Driven Apron Chain
* Standard Rubber Seal Kit (Endgate & Front Panel)
* Apron Chain
* Galvanized Slats
* Quick Drop Beaters
* Replaceable Reversible Knives
* Robust and Dynamically Balanced
* Beater Wedge
* Driveline Protection
* Industrial Jack
* CV Shaft
* High Load Bearings

Optional Extras

Paddle Kit: The optional bolt-on paddle kit cups material to provide better throw.

Spinner Deck: For better management and spreading performance of poultry litter, Nitro spreaders can be equipped with an optional spinner deck. The interchangeable quick-drop beater system allows operators to conveniently switch between the vertical or spinner deck beater assemblies offering flexibility to both producers and custom operators.

LED Lights: LED lights and flashers ensure transit safety. Innovative light covers mechanically open and close in sequence with the end gate, ensuring lights are protected while spreading.

Optional Colours: In addition to the standard yellow, the Nitro lineup is available in red, green, blue, and orange.

Enhanced Rubber Seal Kit: The Enhanced Rubber Seal Kit adds a U-shape compression seal to the front panel and the endgate to help contain semi-solid materials.

Oscillating Ball Hitch: Optional on all models is the oscillating ball hitch available in various pin sizes.

Brakes: When equipped with a brake system, all Nitro spreaders come with two calipers per side for a total of four. Hydraulically operated, these calipers provide the necessary clamping force to keep even our monstrous Nitro 950 in line. A single axle is shown. Braking configurations may vary with the model. Check model specifications for brake availability.

Gate Indicator: With the gate indicator, you can quickly and easily see how open the endgate is from the seat of your tractor.

Digi-Star® Scale System: The optional Digi-Star® 5pt 60,000 lb. differential weigh beam system is available on all Nitro models. Four of the load cells are located under the box and the fifth cell is placed on the hitch. Accounting for environmental protection, the Digi-Star® scale system lets you know how many tons you've hauled and spread on your fields, perfect for both farmers and custom operators.

Specifications - Nitro 575 RS
Capacities determined by ASAE Std S324.2
Carrying Capacity: 16 Tonne
Heaped: 16.3 m3
Struck Level: 10.7 m3
Inside Dimensions (LxWxH): 5.53 x 1.58 x 1.15 m (Inside width between flare 2.6m) 
Overall Length: 8.3 m
Overall Outside Width (Tandem Axle): 2.94 m
Loading Height (Tandem Axle): 2.0 m
Wheel Hub Capacity (Tandem Axle): 5.4 tonnes (8 Bolt) x4
Tandem Tire Sizes: 550/45-22.5 Flotation Tyres
Beater Diameter: 863 mm / 34"
Beater Speed: 420 RPM
PTO Speed: 1000 RPM
Apron Chain Link Dia: 15.85 mm  / 5/8"
Shipping Weight: 4.98 Tonne
Required Tractor PTO HP: 125+
Brakes Available: Yes (Can be field installed)

BARGAIN min-till paddock renovator. Aervator Maxi 4.0m with trailing kit, Lehner Vento 8 electric airseeder and mounted spring tine harrows (not shown in photos). The machine has done next to no work, all points are still very clear on the tines, use passively to aerate or offset gangs to aggressively cultivate and re-seed. Suit new buyer. 

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.

2025 TUBELINE NITRO 575RS MANURE SPREADER (16 TONNE)

Vacuum plate planter for the precision of seeds

Three-point linkage planter ground drive to seeder mechanism with PTO to a vacuum system

The Pneumatic Precision Planter (PPP06) is usually more appropriate to use where there is plenty of straw waste on the field.

Depth settings can be adjusted with the help of the wheels next to the planter disc, while pressure is applied with V-shaped pressure wheels at the rear of the unit. Also optionally a seed pressure wheel is attached to rear side of the planter discs for small and delicate seeds.

For disc type machines, fertiliser colter are also produced with double-disc. Available in 4 or 6 row models.

Standard Features
1- disc opener
2- double press wheels
3- large seedbed prep wheels
4- 70 cm row spacing standard
5- Variable spacing from 45 to 80cm
6- Optional Fertiliser boxes
7- Optional press wheel style
 
Quality, European-made, six-row precision planter.
 
* Designed to make sowing with high depth-precision, without any effect from straw waste on the field in every kind of soil and climate conditions.
* The unit weight is distributed evenly to the ground, thanks to depth adjustment wheels which have a wide contact surface.
* It doesnt increase the penetration resistance of the soil. In this way, especially in the ridge planting applications, the sowing operation happens without damage to ridges that have been prepared before.
* Maximum sowing depth precision with depth adjustment wheels which work in tandem.
* Practical depth adjustment which is made from one single point.
* Low-angle positioned double disc design which doesnt become affected by the straw waste on the field.
* Angle, width, and pressure adjustable V-type pressure wheels.
* Moveable seed pressure wheels which increase the contact with the soil and seed.
* Double disc, high and stiff, adjustable fertilizer coulters.
* Other models available. 4, 8, or 10-row machines.
 
Specifications - PPP06
Width: 3880 mm
Height: 2710 mm
Length: 2230 mm
Seed Tank Volume: 6 x 32
Fertiliser Tank Volume: 780 L
Disc Hole Diameter: 1-6 mm
Disc Hole No: Variable
Distance Between Rows: 700 mm
Row-Top Distance: 1-177 cm
Operating Speed: 5-7 km/h
Required Power: 100+ HP
Weight: 1475 kg
 
OPTIONAL EXTRAS
* Plastic or steel fertiliser hoppers
* Telescopic frame for easy road transport
* Disc type furrow opener
* Front pressure wheelset for beet planting.
* Singular rear press wheels in-lieu of double.
* Powder chemical distributor
* In-cab seed control/monitoring system

We can deliver this machine Australia-wide, just ask us for a delivered price.

FarmTech is the national distributor of this machine in Australia. Should you prefer to buy this machine through your local dealer, you can do that too, just ask!

Contact FarmTech today for sales or more information.

2026 FARMTECH PPP06 PNEUMATIC PRECISION PLANTER-SEED ONLY ( 6 ROW)

The T-YYK cultivator is a secondary tillage tool for tilling the soil without turning it over. It attaches to the tractor via 3 point linkage and uses 9, 11 or 13 spring-loaded tines for tilling in fields or orchards and to prepare seedbeds.

In arable lands, they are used for tillage at the required depth to provide soil aeration/pulverisation and for preparing the soil before sowing by uprooting weeds for fertiliser and preparing seedbeds, which means the application of herbicides is also reduced.

Machine/Equipment base price only, additional price for optional extras. 

We can deliver this machine Australia wide, just ask us for a delivered price.

Prefer to buy this machine through your local dealer? You can do that too, just ask!

Contact FarmTech today for sales or more information.3

2026 MINOS-AGRI T-YYK-11 CULTIVATOR (11 TINE)

FARMTECH MACHINERY offer quality new and used listings for sale. Click here to search and view their latest stock list on tradefarmmachinery.com.au

New & Used Farm Machinery For Sale

FARMTECH MACHINERY

Sale Price

2026 TANCO TC 1400V TRAILING ROUND BALE WRAPPER - SPECIAL PRICE

2025 TANCO TC A100-EH TRAILING ROUND BALE WRAPPER - SPECIAL PRICE

2026 AERVATOR SGH180 (1.8M)

2026 SEEDX FTD 3000 TINE SEED DRILL (3.0M)

2025 TUBELINE TL70 LSV-PLA BALE WRAPPER

2026 AERMAX-ECO GH3004 ONE PASS RENOVATION SYSTEM (3.0M)

2026 AUSMIX FT-XL12 HD VERTICAL FEED MIXER + 1.0M ELEVATOR (12.0M3)

2026 FARMTECH BAF 200 VINEYARD SUBSOIL FERTILISER SPREADER (300L)

2026 UNIA CROSS S 3 STANDARD CULTIVATOR (3.0M)

2025 TUBELINE NITRO 575RS MANURE SPREADER (16 TONNE)

2026 FARMTECH PPP06 PNEUMATIC PRECISION PLANTER-SEED ONLY ( 6 ROW)

2026 MINOS-AGRI T-YYK-11 CULTIVATOR (11 TINE)

FARMTECH MACHINERY

Dealer Address